2-in-1 Cleaning & Reaming Machine

Due to ongoing use, in course of time the tubes develop the following undesirable deviations:

The fitment of the tubes on the applicable spindles require high pressing load which interrupts the smooth doffing process.

In extreme cases the tubes fail to fit on the spindle due to groove formation.

1. The spindles, from repeated use in a humid environment, would accumulate debris on the outside diameter of the spindles and the tubes also have the accumulated sticky substances inside the tubes. Due to this the tubes do not enter smoothly on the spindles as per the required feel of the smoothness and the force required to press the tube on the spindle. To overcome the above problems, from time to time the tubes have to be cleaned/polished on the inside so as to ensure the pressing load in specified load range which is one of the important requirements for the smooth and positive doffing process.

2. Due to repeated use, the tubes sometimes develop shallow groove formation due to inadequate entry of the tube on the spindle or due to out of square entry on the spindles. This groove displaces the material of the tube which prevents the entry of the tubes on the spindles. Ideal has developed user friendly TWO IN ONE SET UP as per the Photo No. 01 for the cleaning of the tubes from inside and reaming where required so as to regain the required characteristics within the permissible fine limits so as to achieve uninterrupted performance till the rated life span of the tubes.